316 vs 304 Glass Clamps: Which Stainless Steel Do You Need?

Glass clamps look almost identical whether they are made from 304 or 316 stainless steel, and 304 is usually cheaper. But on a balustrade that lives outdoors, the grade you choose decides whether your clamps still look clean in five years or show brown rust spots after the first winter. Here is what the difference actually is, and when it matters.

The short answer

  • Indoors, in a dry room: 304 is generally fine.
  • Outdoors, on decking, balconies or terraces: choose 316.
  • Near the coast, by a pool or anywhere road salt is used: 316 is the only sensible choice.

What is the difference between 304 and 316?

Both are austenitic stainless steels built on chromium and nickel, which form a thin protective layer on the surface. The key difference is that 316 contains molybdenum (typically around 2 to 3%). Molybdenum makes the steel far more resistant to chlorides: the salts found in sea air, swimming pool water and de-icing salt. That is why 316 is often called marine grade.

304 stainless 316 stainless
Molybdenum None Around 2 to 3%
Resistance to salt and chlorides Moderate High
Best for Indoor, dry locations Outdoor, coastal, poolside
Price Lower Higher

What goes wrong with 304 outdoors?

In damp or salty air, 304 is prone to tea staining (light brown surface discolouration) and pitting (small spots of corrosion). It is mostly cosmetic at first, but on a feature like a glass balustrade, where the whole point is a clean, high-end look, brown marks around every clamp spoil the finish quickly. Clamps also sit in the places where water and dirt collect, right against the glass.

Why we only sell 316

Every post, clamp, handrail and fitting in our range is 316 marine grade, rated for coastal sea-spray zones within ten miles of the sea. Most of our customers fit balustrades on decking, balconies and terraces, so we would rather supply one grade that works everywhere than risk a 304 clamp ending up outside.

Choosing the right clamp profile

Once the grade is right, you need the right shape for what you are clamping to:

  • Square back: sits flush against flat-faced posts and walls.
  • Curved back: shaped to sit against round tube posts.

Our 316 stainless steel glass clamps come in both profiles for 10mm toughened glass, with rubber inserts supplied, and suit both our frameless and handrail systems.

Do you need to buy clamps separately?

Usually not. Our balustrade posts arrive with the correct number of clamps already fitted. Separate clamps are for spares, replacing a damaged clamp, extra clamps on a non-standard run, or fixing a panel to a wall.

Fitting tips that protect the glass

  • Leave a minimum 3mm gap between the glass edge and the metal so glass never touches steel.
  • Tighten by hand with a hex key, a little at a time. Never use power tools: over-tightening can stress and break toughened glass.
  • Check the panel is square before final tightening.

Keeping 316 looking new

Even 316 benefits from a rinse with warm soapy water every few months, more often near the sea, to stop salt and dirt building up. Avoid wire wool and harsh abrasives, which can scratch the surface.

Quick checklist

  • Outdoors or near salt? Choose 316.
  • Flat post or wall? Square back. Round tube? Curved back.
  • Glass thickness matched to the clamp (ours are for 10mm).
  • Spares only: posts already include their clamps.

Plan your full balustrade

Use our free glass balustrade designer to work out panels, posts and clamps for your run, with an instant price including VAT and free delivery to UK mainland. For a step-by-step on sizing, see our measuring guide.

Back to blog