{"title":"Fittings \u0026 Accessories","description":"\u003cp\u003e\u0026lt;p\u0026gt;Fittings, fixings and spares for glass balustrade installations, in \u0026lt;strong\u0026gt;316 marine grade stainless steel\u0026lt;\/strong\u0026gt; where the part is exposed to weather.\u0026lt;\/p\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u0026lt;h3\u0026gt;Glass clamps\u0026lt;\/h3\u0026gt;\u003cbr\u003e\u0026lt;p\u0026gt;Square back clamps sit flush against flat-faced posts and walls; curved back clamps are shaped to fit round tube. Both hold \u0026lt;strong\u0026gt;10mm toughened glass\u0026lt;\/strong\u0026gt; and are supplied with rubber inserts. Posts already arrive with the correct number of clamps, so these are for \u0026lt;strong\u0026gt;replacements, spares or non-standard runs\u0026lt;\/strong\u0026gt;.\u0026lt;\/p\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u0026lt;h3\u0026gt;Gate hardware\u0026lt;\/h3\u0026gt;\u003cbr\u003e\u0026lt;p\u0026gt;Self-closing hinges return a glass gate to the closed position without a separate closer, with a matching latch to suit. Both \u0026lt;strong\u0026gt;clamp directly onto the glass with no drilling required\u0026lt;\/strong\u0026gt;, which keeps the panel at full strength.\u0026lt;\/p\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u0026lt;h3\u0026gt;Post fixings\u0026lt;\/h3\u0026gt;\u003cbr\u003e\u0026lt;p\u0026gt;M10 x 100mm anchor bolts for concrete and brickwork, and hexagon head coach screws for timber decking and joists, both in packs of ten. Sized to reach the \u0026lt;strong\u0026gt;minimum 100mm fixing depth\u0026lt;\/strong\u0026gt; recommended for balustrade base plates. A 7mm drill bit and 8mm tap set is available for on-site fabrication of angle post fixings.\u0026lt;\/p\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u0026lt;p\u0026gt;\u0026lt;strong\u0026gt;A note on fitting:\u0026lt;\/strong\u0026gt; never tighten glass clamps with power tools, and leave a minimum 3mm gap between the glass edge and the clamp to allow for expansion.\u0026lt;\/p\u0026gt;\u003c\/p\u003e","products":[{"product_id":"glass-clamps-316","title":"316 Stainless Steel Glass Clamps for 10mm Toughened Glass","description":"\u003cp\u003e\u003cstrong\u003eMirror-polished 316 marine grade stainless steel glass clamps\u003c\/strong\u003e for 10mm toughened balustrade panels, rated for coastal sea-spray zones within ten miles of the sea.\u003c\/p\u003e\u003ch3\u003eChoosing a back profile\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare back:\u003c\/strong\u003e Sits flush against flat-faced posts and walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved back:\u003c\/strong\u003e Shaped to sit against round tube.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpares and extras\u003c\/h3\u003e\u003cp\u003eBalustrade posts already arrive with the correct number of clamps fitted. These are intended as \u003cstrong\u003ereplacements, spares for a damaged clamp, or extras\u003c\/strong\u003e for a non-standard run or a wall-mounted panel. They suit our handrail and no-handrail systems alike, as glass thickness is the same across both.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion gap:\u003c\/strong\u003e Leave a minimum 3mm between the glass edge and the metal clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever use power tools.\u003c\/strong\u003e Over-tightening can stress the panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck square\u003c\/strong\u003e before final tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e316 grade stainless steel, mirror polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGlass thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProfiles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSquare back, curved back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInserts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRubber, supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBoth handrail and no-handrail systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Chelmer Glass \u0026 Co","offers":[{"title":"Square Back","offer_id":54806566666582,"sku":"CGC-CLAMP-SQ","price":12.0,"currency_code":"GBP","in_stock":false},{"title":"Curved Back","offer_id":54806566699350,"sku":"CGC-CLAMP-CV","price":12.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1042\/7849\/1478\/files\/IMG-CLAMP-SQ_e84cbb60-0d0f-488c-b35c-c81ec5302d9b.jpg?v=1784899261"},{"product_id":"glass-gate-hardware-316","title":"316 Stainless Steel Glass Gate Hardware - Self Closing Hinges and Latch","description":"\u003cp\u003e\u003cstrong\u003eMirror-polished 316 marine grade stainless steel gate hardware\u003c\/strong\u003e for glass balustrade gates, rated for coastal sea-spray zones within ten miles of the sea.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf closing hinges:\u003c\/strong\u003e The pair returns the gate to the closed position on its own, with no separate closer to fit or maintain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching latch:\u003c\/strong\u003e Finished and sized to match the hinges for a consistent look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo drilling required:\u003c\/strong\u003e Clamps directly onto 10mm toughened glass, so the panel is never drilled, cut or modified. This keeps the glass at full strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem matched:\u003c\/strong\u003e Finish and fixing centres match our balustrade post, handrail and clamp range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you are ordering\u003c\/h3\u003e\u003cp\u003eThe hinge pair and the latch are sold \u003cstrong\u003eseparately\u003c\/strong\u003e. Most gates need one hinge pair and one latch.\u003c\/p\u003e\u003ch3\u003eImportant\u003c\/h3\u003e\u003cp\u003eNever tighten glass clamps using power tools. It is the customer's responsibility to ensure the finished installation meets relevant building regulations, including any \u003cstrong\u003epool or child safety requirements\u003c\/strong\u003e that apply.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e316 grade stainless steel, mirror polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGlass thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHinges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSelf closing, supplied as a pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrilling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePool gates, garden gates, balustrade gates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Chelmer Glass \u0026 Co","offers":[{"title":"Self Closing Hinges Pair","offer_id":54806567747926,"sku":"CGC-GATE-HINGE","price":220.0,"currency_code":"GBP","in_stock":false},{"title":"Gate Latch","offer_id":54806567780694,"sku":"CGC-GATE-LATCH","price":110.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1042\/7849\/1478\/files\/IMG-GATE-HINGE_d3310a00-9d63-4e05-bac4-e8b57ad5bfae.jpg?v=1784899263"},{"product_id":"balustrade-post-fixings","title":"Balustrade Post Fixings - M10 Anchor Bolts, Coach Screws and Drill Tap Set","description":"\u003cp\u003eFixings and tools for installing glass balustrade posts, \u003cstrong\u003ematched to the substrate you are fixing into\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eChoosing the right fixing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor bolts:\u003c\/strong\u003e M10 x 100mm for concrete and brickwork. Supplied in packs of ten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoach screws:\u003c\/strong\u003e M10 x 100mm hexagon head for timber decking and joists. Always fix into solid joist, never decking boards alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill and tap set:\u003c\/strong\u003e A 7mm drill bit with matching 8mm tap, for fabricating angle post fixings on site.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFixing depth\u003c\/h3\u003e\u003cp\u003eBoth fixings reach the \u003cstrong\u003eminimum 100mm depth\u003c\/strong\u003e recommended for balustrade post base plates. Fix through \u003cstrong\u003eevery hole\u003c\/strong\u003e in the base plate, not just two, and check the post is plumb before final tightening.\u003c\/p\u003e\u003ch3\u003eImportant\u003c\/h3\u003e\u003cp\u003eInstalling to a solid foundation is essential. It is the customer's responsibility to ensure the finished installation meets relevant building regulations.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnchor bolts for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConcrete, brickwork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoach screws for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTimber decking, joists\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrill and tap\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7mm drill bit, 8mm tap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Chelmer Glass \u0026 Co","offers":[{"title":"Anchor Bolts Pack of 10","offer_id":54806568010070,"sku":"CGC-FIX-ANCHOR","price":15.0,"currency_code":"GBP","in_stock":false},{"title":"Coach Screws Pack of 10","offer_id":54806568042838,"sku":"CGC-FIX-COACH","price":20.0,"currency_code":"GBP","in_stock":false},{"title":"Drill Bit and Tap Set","offer_id":54806568075606,"sku":"CGC-FIX-DRILLTAP","price":15.0,"currency_code":"GBP","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1042\/7849\/1478\/collections\/IMG-CLAMP-CV_06f6e3ef-b6c2-49a3-b9d3-a551b61c59d6.jpg?v=1784824612","url":"https:\/\/chelmerglass.co.uk\/collections\/fittings-accessories.oembed","provider":"Chelmer Glass \u0026 Co","version":"1.0","type":"link"}